-
-
-
C-185, C-188, Raath Nagar, Alwar – 301001, Rajasthan, India
Ecoplug's intelligent Load Management System dynamically distributes available power across all chargers in real time — maximising charging speed for every vehicle while keeping your site safely within its grid capacity limit. No infrastructure upgrades. No tripped breakers. No wasted power.
Installing multiple EV chargers at a single site creates a power management challenge that most operators don't anticipate — until it's too late.
Every Ecoplug charger comes with load management built into the CSMS — no additional hardware required.
Available power is continuously redistributed across all active chargers every 5 seconds. When a vehicle finishes charging, its power is instantly reallocated to other chargers — maximising throughput.
Set your site's maximum grid capacity once. The system guarantees total load never exceeds this limit — regardless of how many chargers are active simultaneously. Zero overloads, guaranteed.
The system monitors your building's existing power consumption in real time and adjusts charger output accordingly — ensuring EV charging never competes with your building's critical loads.
Define priority rules — VIP vehicles, emergency fleets, or specific chargers always get maximum power first. Lower-priority chargers receive remaining capacity. Fully configurable from the CSMS.
Schedule charging windows to align with off-peak electricity tariff periods. The system automatically shifts charging load to cheaper hours — reducing your energy costs without any manual intervention.
Live visualisation of power consumption across every charger and the building — updated every 5 seconds. Historical load curves, peak demand analysis, and energy cost reports all in one dashboard.
Integrate with on-site solar or renewable energy sources. The system prioritises renewable energy for EV charging and adjusts grid draw dynamically based on solar generation output.
Instant alerts if load approaches the configured limit — via email, SMS, or in-app push. Configurable warning thresholds at 80%, 90%, and 95% of grid capacity for proactive management.
Load management is built into every Ecoplug AC and DC charger — from 3.3kW AC wall chargers to 480kW ultra-fast DC units. No additional hardware, no third-party controllers required.
The Ecoplug Load Management System runs a continuous 5-second cycle — sensing, calculating, and rebalancing power across your entire site automatically.
Every 5 seconds, the CSMS reads the current power draw from every active charger and the building's main meter via real-time IoT sensors.
The system calculates the remaining available power headroom: Grid Limit minus Building Load minus Current Charger Load = Available for redistribution.
Priority rules are applied — VIP vehicles, fleet schedules, and time-of-use tariff windows determine which chargers receive more power and which are throttled.
New power limits are sent to each charger via OCPP commands. Chargers adjust their output within milliseconds — the driver notices nothing except a faster charge.
Every rebalancing event is logged. If load approaches the configured limit, alerts are sent. Full historical load curves are available in the CSMS dashboard.
Whether you have 4 chargers or 400 — Ecoplug's load management scales to your site and keeps your grid safe.
Basement parking with 20–100 AC chargers sharing a limited building power connection. Load management ensures all residents can charge overnight without tripping the building's main breaker.
Office parking with employee EV chargers sharing power with the building's HVAC, lighting, and equipment. Load management prevents EV charging from impacting office operations during peak hours.
Logistics depots with 50–200 chargers charging overnight. Smart scheduling combined with load management ensures all vehicles reach target SoC before morning dispatch — within grid limits.
Public charging in mall parking with variable visitor load. Load management dynamically adjusts charger output as the mall's power demand fluctuates throughout the day.
Multiple high-power DC chargers at a highway HUB sharing a single grid connection. Load management ensures simultaneous fast charging without exceeding the connection limit.
Sites with rooftop solar panels. Load management prioritises solar energy for EV charging, reduces grid draw during peak solar hours, and seamlessly switches to grid when solar output drops.
Every Ecoplug charger comes with load management built in. Talk to our team about deploying smart EV charging at your site — we will design the optimal solution for your power capacity.
